The Path To Finding Better Tips

A Guide to Wood Science

The study of wood as a renewable material and organic material is what is known as wood science. In other words, the term wood science can also be known as wood technology. Wood is treated as a material in direct comparison with other products. The wood is checked against the other materials properties, performances, value, and work-ability. The utilization of technology gives wood an upper hand in most of this comparison. The wide range of products where wood can be used is just one of the many advantages that give wood an upper hand over other products. Once a tree has been cut down another can be planted in the same spot. All the parts of wood can be put into use, and this makes it a better fit than other materials which most of their byproducts are a waste.

For your wooden products and house to stay for long and have a good appearance it needs to be protected. Wooden structures have to be kept away from water and pests that eat through the wood. The rotting and decay of the timber products are caused by the moisture and the insects. Many methods are available in the treatment of wood one of the most common being the ACQ – alkaline copper Quaternary. The protection of from this chemical is based on copper. There are a few disadvantages of this method as a mode of wood preservation. It is a highly corrosive chemical that affects most metals that are used together with the wooden products. The concentration of the chemical that will be used to treat a piece of wood will depend on the where it is going to be used and the molecular structure of the wood. Timber being used around a water body will be dipped in a more saturated fluid than that being used above ground.

Another wood treating method that is fast being accepted is the use of copper metal. The use of this method is fast being accepted because it is not corroding the metal fasteners. This process is what in other words called the micronized copper wood preservative. In this process microscopic particles of solid copper metal are mixed in a liquid carrier and injected to the wood at high pressure. In other copper-based preservation methods copper is dissolved in chemicals while in this method copper is driven into the wood as a metal. When this process is used to treat timber the timber properties are increased highly. The timber treated in this way is used in both outdoor and indoor frames that last very long.

The micronized copper preservative has proven to be highly effective in protecting the wood against fungal decay and termites. Unlike other methods of treatment this method is not corrosive. The wood treated using this method last longer and is stronger.